The production process of heaven and earth lid box

The production process of heaven and earth lid box

The lid and base box is a common packaging box style, and its production process is relatively standardized, mainly including the following steps:

1.Determine the design draft: This is the first step in the production process, which needs to design the appearance and structure of the box according to the product characteristics, brand image and market demand.

2.Confirm samples, order production: After the design is finalized, samples are usually made for customer confirmation.After confirmation, you can officially place an order to start production.

3.Scheduling production materials: including face paper, envelope, inner sticker, backing paper, cardboard or density board, inner supporting materials, etc.The choice of these materials directly affects the quality and cost of the packaging box.

4.Printing bag paper and inner sticker: printing according to the design draft, if there is a matching handbag also need to be printed together.

5.Post-work process production: this step may include laminating, embossing, over-UV, bronzing, embossing, die-cutting and other processes, according to the actual needs to choose the appropriate process.

6.Cutting: Use a paper cutter to cut the printed face paper, inner stickers, and the panel, coaming and inner support of the gray cardboard material to a predetermined size.If it is density board, you need to use a professional large saw cutting material.

7.Panel processing: For the upper and lower cover boxes of density board materials, the open sheet material needs to be fixed and drained with white latex first.The upper and lower cover boxes of gray cardboard material can be opened into "well" V-slots, and the four corners are removed and fixed directly with tape.

8.Veneer paper and inner sticker: The veneer paper and inner sticker are attached to the corresponding part according to the requirements. It should be noted that the surface should be scraped flat and the edge should be packed firmly.

9.Box assembly: the top cover and the bottom of the buckle, if the use of connected upper and lower covers, you need to use the connecting plate to connect the upper and lower covers after forming.

10.Place the inner bracket: Place the inner bracket according to the need, pay attention to the asymmetric upper and lower inner bracket to distinguish the direction.

11.Wipe the box and pack the box: Finally clean and arrange the finished product box.

The above is the basic production process of the lid and base box.It should be noted that in the entire production process, the quality should be strictly controlled to ensure that each link meets the standard